A Room With A View Etched Window

Fashion a stylish room divider out of an old weathered window.

Junk windows are available everywhere, from salvage yards to flea markets. (You might even have one under your house!) These architectural castoffs are do-it-yourself projects just waiting to happen. And why wait when you can turn any old window into a fabulous etched room divider in no time? Armour Etch, available at craft stores, actually etches glass with just one application. So you can put away your sand blaster!

Creating a beautiful design for your etched window is simple when you use spectacular stencils. Large templates, often used for decorative wall painting, are the perfect size for panes of glass. But for artier designs with bold graphics, look for scrapbooking stencils. We found 12" by 12" doodling templates from TheCraftersWorkshop.com that feature stylish swirls and paisleys. Gorgeous!

YOU'LL NEED:
Old wooden window
Con-Tact paper
Large stencil
10 oz Armour Etch cream
Steel chain
4 Screw hooks
Drop cloth
Window cleaner
Paper towels
Sharpie marker
Craft knife
Sponge paintbrush
Protective gloves

WHAT TO DO:
Step 1

To create the design, trace the stencils onto the Con-Tact paper with the Sharpie. Cut out the Con-Tact paper with the craft knife. Wipe the window thoroughly with window cleaner, then stick the Con-Tact paper cutouts to the glass and rub the edges down carefully. (Positioning the cutouts on the glass is much easier if you tape the stencil to the other side of the window.) Clean the exposed glass one more time to ensure the best results.

Step 2

To etch the glass, apply the Armour Etch cream with the sponge brush, painting a thick layer of etch cream over the glass and the Con-Tact paper cutouts (don't forget to don your gloves first!). Let the etch cream set for 5 minutes, then rinse the window in the bathtub with lukewarm water, peel off the cut-outs, and continue rinsing until clean. As the window dries, the pattern will reveal itself. Amazing!

Step 3

To hang the etched window room divider, attach 2 hooks to the top of the window and 2 hooks to the ceiling the same distance apart. Hang with equal lengths of steel chain.

Brushstroke of Genius: With this technique, the brushstrokes tend to show, so use it to your advantage. Apply the etch cream with a swirling motion and any brush marks will look like part of the design.

The Butterfly Effect

 

Bring the beauty of a butterfly garden to your patio with a whimsical etched window. Just pick up an old wooden window at the flea market, mask a flower and butterfly design, then etch with real etch cream. As you rinse your window clean, the ethereal image will be revealed!

Materials
Wooden window from the flea market
White Con-Tact paper (not shelf liner)
Plaid Silhouette Stencils:
Butterfly 29636
Floral Burst 29640
Chandelier 29637
Armour Etch glass etching cream (10 oz)
Steel chain*
2 Screw hooks (3½")


Tools
Sharpie marker
Scissors
Drop cloth
Window cleaner
Paper towels
Protective gloves
Sponge paintbrush
Kitchen timer
Drill


*Steel chain isn’t easy to cut, so measure before you go to the hardware store. Hold your window under the branch where you’d like it to hang. Have someone measure the distance from the window to the branch at each end. One length might be longer than the other if the branch slopes. Get the two lengths cut at the hardware store.


Instructions
1. Start by making a set of large stickers to use as a mask. To do this trace the Silhouette stencils onto the Con-Tact paper using a Sharpie. Cut them out with scissors but do not remove the backing yet. Arrange the cut-outs on your window to create a pleasing design. Make a sketch or take a snapshot with a digital camera to refer to later.


2. Set the stickers aside, don your gloves, and thoroughly clean the window with window cleaner and paper towels. It is very important to clean any and all oil from your fingers off the window. Any fingerprints will show up when you etch, and your finished project could end up looking like a crime scene!


3. With your gloves still on, peel the backing off the stickers and press your design onto the window. Use your snapshot from before as a guide. Crumple a piece of the adhesive backing into a ball and use the slippery side to rub down all the edges of your stickers. Clean the glass one more time by spraying the window cleaner onto the paper towel and carefully wiping the exposed glass around your stickers.


4. For the etching process, take the window outside and lay it flat on a drop cloth. Be sure you are still wearing your gloves. Using the sponge paintbrush, apply a thick layer of etch cream over the glass and stickers. Your brushstrokes will show, so use a swirling motion to create a pattern with the etch cream. Once your window is entirely covered with etch cream, set your timer for 5 minutes.

5. After 5 minutes, rinse the etch cream off the window with a garden hose. Rub the surface with your gloved hand to help clean the glass.


6. Take off your gloves and peel all the stickers off the window. Rinse again with the garden hose to remove any remaining etch cream. Let the window dry.


7. To hang your etched window, pre-drill two holes a few inches from each end, then screw two hooks into the top of the window frame. Attach two lengths of steel chain to a sturdy horizontal branch in your yard. Then hang the window from the last link in each chain.

Improved With Age: For a garden piece like this, shabby is chic! So keep an eye out for a wooden window with a weathered look. You can pick one up for less than $20.